粉体行业在线展览

产品

产品>

分析仪器设备>

生物工程设备

>显微镜物镜加热器

显微镜物镜加热器

直接联系

上海玉研科学仪器有限公司

意大利

产品规格型号
参考报价:

面议

关注度:

699

产品介绍

显微镜物镜加热器OBJECTIVE HEATER

对显微镜物镜进行加热、保温

Features

Temperature controlled heating band

Easy installation around the objective

Fits any objective on the market

Compatible with the following OKOLAB Controllers:

H301-T-UNIT-BL-PLUS

UNO-T-H-PREMIXED

UNO-T-H-CO2

H401-T-CONTROLLER

Compatible with Inverted and Upright Microscopes

Self CalibrationRoutines with BL controllers

Voltage: 24 V

Power: 13 W

When should I use an Objective Heater

You should use an objective heater, if you:

Perform Oil Immersion Imaging with a Top Stage Incubator

Use dipping lens with an upright Top Stage Incubator

Why should I use an Objective Heater?

Because, if you don't, sample temperature will drop due to oil contact with the cold objective, as shown in the following graph.

Step 1: Objective not in contact with Petri 2; Objective Heater Off.

Step 2: Objective in oil contact with Petri 2; Objective Heater Off.

Step 3: Objective in oil contact with Petri 2; Objective Heater on, Offset value 5.3°C.

During the self calibration routine, the offset value of the objective heater is progressively increased, until T2 reaches the desired set point temperature of 37.0°C.

Figure 3 reports the profile of T1, T2, and of Objective Heater Temperature during the experimental campaign described above.

请关注玉研仪器的更多相关产品。

如对产品细节和价格感兴趣,敬请来电咨询!

产品咨询

显微镜物镜加热器

上海玉研科学仪器有限公司

请填写您的姓名:*

请填写您的电话:*

请填写您的邮箱:*

请填写您的单位/公司名称:*

请提出您的问题:*

您需要的服务:

发送

中国粉体网保护您的隐私权:请参阅 我们的保密政策 来了解您数据的处理以及您这方面享有的权利。 您继续访问我们的网站,表明您接受 我们的使用条款

显微镜物镜加热器 - 699
上海玉研科学仪器有限公司 的其他产品

FLOW

生物工程设备
相关搜索
关于我们
联系我们
成为参展商

© 2024 版权所有 - 京ICP证050428号