粉体行业在线展览
粉体行业在线展览
直接联系
溢鑫科创科技集团
英国
面议
361
The MTM High Resolution Thickness Monitor will fit any of the Cressington sputter and carbon coating systems as well as other thin film vacuum coating systems which allow for a vacuum feedthrough of 10 mm diameter a on a plate thickness of 9 mm.
| General Specifications: | Microprocessor based， 4-digit display， push-button zero 6MHz crystal with lifetime check 5 times per second update rate |
| Thickness Range: | 0.0 - 999.9nm (pos/neg) |
| Resolution: | 0.1nm for carbon |
| Density Range: | 0.50 - 30.00g/cm³ |
| Tooling Factor Range: | 0.25 - 8.0 |
| Processor Function: | Four sets of values can be stored in memory under Density and four under Tooling for both the MTM-10 and MTM20 |
| MTM-20 Controller: | MTM-20 only: Programmable thickness termination function with termination interface cable on 108 auto， 208HR and DC-100 Termination facility range 0-999.9nm |
General Specifications:
Microprocessor based， 4-digit display， push-button zero
6MHz crystal with lifetime check
5 times per second update rate
Thickness Range: 0.0 - 999.9nm (pos/neg)
Resolution: 0.1nm for carbon
Density Range:0.50 - 30.00g/cm
